Buy Delonghi PAC-L90 Pinguino 10, 000-BTU Portable Air Conditioner: Portable - Amazon.com FREE DELIVERY possible on eligible purchases.

When you air condition, you essentially remove heat from the 'inside air' and transfer it to the 'outside air'. From a google search this thing is sort of like a window air conditioner, but the hot air is sent outside via a vent hose, so the unit can be located away from the window. Any time you cool air, it holds less water, so depending on the humidity, there will be condensate formed, the question is, how is it dealt with. In window air conditioners, you see it dripping from the back side when it is running. For your unit, is it unclear how the condensate is being removed; maybe hot air going outside is directed across where the condensate collects and it is assumed it will evaporate and be vented outside as vapor? First, check and see if the unit is still under warrantee, if so, contact them and see how to get it fixed (if you mess with it, it might void the warrantee). If it has expired or the company is out of business, etc, you can try opening it up and see what is going on.

The water collects under the evaporator (the fins where cold air comes out). Underneath there should be some kind of tray or something that collects the condensate and directs it somewhere in the unit for it to be gotten rid of. I'm thinking something is cracked, leaking or come loose, letting the water escape and run out. If that is the case, you might be able to use silicone seal or something like it to seal the leak. Hopefully, it is something simple like that. Sep 13, 2013 .

Livro Atkins Quimica Inorganica. • Important safeguards • Use this appliance only as described in this instruction manual. As with any electrical appliance, the instructions aim to cover as many situations as possible.

Caution and common sense should be used when operating and installing this air conditioner. • Setting up your portable air conditioner TO AVOID DAMAGE TO THE UNIT: NEVER TRANSPORT OR TURN THE APPLIANCE UPSIDE DOWN OR ON ITS SIDE. IF THIS OCCURS, WAIT 6 HOURS BEFORE TURNING THE APPLIANCE ON, 24 HOURS IS RECOMMENDED. (After the unit has been on its side, oil needs to return to the compressor to ensure proper function. • Semi-permanent installation • Fit the wall flange (10) into the hole. SEMI-PERMANENT INSTALLATION • Fit the air exhaust hose (11) in the rele- If required, your appliance can also be vant housing located on the rear side of installed semi-permanently (Fig. The appliance.

• Control panel THE CONTROL PANEL DESCRIPTION OF THE CONTROL PANEL A ON/STAND-BY button B MODE selection button: Air conditioning, dehumidifying, fan. C Fan speed selection button (HIGH/MED/LOW/AUTO) D Timer button Programmed operation increase temperature/time button Programmed operation decrease temperature/time button G Display Displays the temperature values set and the programmed operating time H Timer in operation indicator light I/L/M/N Fan speed lights and AUTO lights. • Operation TURNING THE APPLIANCE ON Plug into an outlet. Two lines appear on the display indicating that the appliance is in stand- Press the ON/STAND-BY button (A). When turned on, the air conditioner starts operating in the same mode as when it was turned off. Press the MODE button (B) until the light corresponding to the desired mode lights up: Light (Q) • Self-diagnosis SELF-DIAGNOSIS The appliance has a self diagnosis system to identify a number of malfunctions.

IS DISPLAYED.WHAT SHOULD YOU DO? The appliance is fitted with a frost protection device to avoid excessive formation of ice on internal components. The appliance starts up again automatically when the defrosting process is com- LOW TEMPERATURE (frost prevention) • Using the remote control MODELS WITH REMOTE CONTROL • Point the remote control at the receiver on the air conditioner. The remote control MAX 23 ft must be no more than 23 ft (7 metres) MAX 7 metres away from the appliance (without obsta- cles between the remote control and the receiver) •. • Using the remote control TURNING THE APPLIANCE ON Plug into the outlet.