The ARCP-2000 radio control program has been updated to Ver.1.20. We are offering the latest version as a download (see below) to purchasers of the ARCP-2000. RT Systems Inc. Offers software for programming and control of the TS-2000 and a USB cable to connect the radio to the computer. Kenwood ARCP Remote Programs. TS-2000 ARCP-2000 v1.10 —July, 2002. There are two ways to operate a control—use the program front panel or the corresponding. (Note: I use the Kenwood ARCP 2000 software only to turn the radio on and off. I like the Ham Radio Delxue radio control program for actual operating. Remote computer: At the Remote computer the panels are set as follows: Play Controls:. The Mic must be muted. This does not control the amount of audio fed to the.
TS-2000/TS-2000X/TS-B2000 KENWOOD Radio Control Program ARCP-2000 Version 1.20 Last updated: February 15, 2012 The ARCP-2000 radio control program has been updated to Ver.1.20. We are offering the latest version as a download (see below) to purchasers of the ARCP-2000.
Notes: When you run this software for the first time, you must enter the license number (CD key) which comes with the ARCP-2000 retail package. Galaxy Unlocker Client Bootloader here. The license number will not be re-issued if it is lost or misplaced. Be sure to keep it in a safe place. The latest version includes all previous updates.
Operating Environment 1. Operating System (OS) Windows ® XP (Service Pack 3 or later) (32-bit) Windows Vista ® (Service Pack 2 or later) (32-bit or 64-bit) Windows ® 7 (RTM or later) (32-bit or 64-bit) Note: This software is designed to run on the above operating systems. Applicable operating systems are subject to change without notice due to the end of the technical support by Microsoft Corporation or change of the product specifications.
Processor Faster than the recommended CPU for each OS. System Memory (RAM) Larger than the recommended System Memory for each OS.
Free Hard Drive Space 100MB or more of free hard drive space. Fritz Box Dsl Start Center. Peripheral Devices A display with resolutions higher than SVGA (800 x 600). A keyboard and a mouse, or other pointing devices. RS-232C interface. An RS-232C straight cable with a 9-pin D-SUB female connector for the transceiver's COM port.
(When the PC has no RS-232C port, then use a USB-to-serial adapter.) Usage Notes If you are remotely controlling the Transceiver using this software via a network such as the Internet, you must conform to the radio laws and relevant domestic laws of the country and/or area where the Transceiver and relevant equipment are installed. If any problem occurs while you are remotely controlling the Transceiver and relevant equipment, the responsibility of finding a solution to the problem is left solely to the user who remotely control the Transceiver and relevant equipment. Users are required to obtain an approval from JVC KENWOOD Corporation, in writing, prior to redistributing this software on a personal web page or packet radio. Users are prohibited to assign, rent, lease, or resell the software. Users are prohibited to revise, change, translate, merge, de-compile, or reverse engineer the software.
JVC KENWOOD Corporation does not warrant that quality and functions of this software comply with each user's purpose of use of this software, and unless specifically described in this document, JVC KENWOOD Corporation shall be free from any responsibilities to any defects and indemnities to any damages or losses. Selection and installation of this software shall be made by the User's designation. The User shall take for the use and effects of this Software. JVC KENWOOD Corporation shall be free from any responsibilities for any incidental losses or damages, such as missing communications or a calling opportunity caused by a failure or performance error of this Software. JVC KENWOOD Corporation shall own all copyrights and other intellectual properties for the software and all manuals and documents attached to the software.
The user shall be allowed to use, not to resell, the software by obtaining a license from JVC KENWOOD Corporation. While the media in which the software is stored is possessed by the user, the ownership for the software itself shall be reserved for JVC KENWOOD Corporation. Cd Crack. Installing the ARCP-2000 Extract the downloaded file 'ARCP2000_120.zip' into a designated folder.